Bosch JS572E Instrucciones De Funcionamiento Y Seguridad página 10

Dust Extraction
(Not included, sold
separately)
The JA1012 Dust Extraction Kit includes
a dust shroud and an extraction tube for
connecting the jig saw to a vacuum hose
or vacuum hose adapter.
Note: The dust shroud must be used
when the extraction tube is connected
to a vacuum cleaner system.
To use this feature, insert extraction
tube into footplate. (Fig. 4).
FIG. 4
DUST SHROUD
(Not included,
sold separately)
For vacuuming, a Bosch vacuum hose or
hose adapter (sold separately) can be
directly connected to the extraction
tube (Fig. 5).
EXTRACTION
TUBE
(Not included,
sold separately)
VAC024 ADAPTER
(Not included, sold separately)
The VAC024 adapter allows connection
to 1-1/4" and 1-1/2" vacuum hoses.
Assembly
FIG. 5
VACUUM HOSE
(Not included,
sold separately)
-10-
Attaching Steel Overshoe
Your tool is equipped with a protective
plastic overshoe that protects finer
surfaces. An optional heavy-duty steel
overshoe for work in rough conditions is
sold separately.
To attach, slide overshoe in direction of
arrow completely onto metal footplate
(Fig. 6).
FIG. 6
Anti-Splinter Insert
To minimize splintering of the top
surface of the material being cut, place
the JA1013 anti-splinter insert in the
blade opening of the footplate's plastic
overshoe (Fig. 7).
Note: The anti-splinter insert cannot be
used when the footplate is tilted for
angle cutting.
Note: This insert will only work with
blades that have ground sides such as
T301CD, T101B, T101D, and T101DP.
FIG. 7
JA1013
ANTI-SPLINTER
INSERT
STEEL
OVERSHOE
FOOTPLATE'S
PLASTIC OVERSHOE