Ninja BL682 Guia Del Usuario página 15

Assembly and Use for the Processor Bowl
ASSEMBLY
Fig. 5a
|
NOTE: Nutri Ninja
Ninja
®
iQ Technology can sense which jar is on the motor
™
base. The function lights will illuminate depending on
which jar is placed on the motor base. (Fig. 1)
Use caution when handling the blade assemblies
as the blades are very sharp.
WARNING: Never leave the appliance unattended while
in use.
IMPORTANT: Make sure that the motor base is
plugged in for use.
1
Holding the desired blade by the top of the shaft, place
it onto the drive gear inside the bowl. Ensure that the
attachment is seated properly and is standing upright.
(Fig. 2)
NOTE: The blade will fit loosely on the drive gear.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top.
3 Align and lower the Processor Bowl onto the motor
base. (Fig. 3) Handle should be aligned slightly to the
right of the "LOCK" symbol on the motor base.
4 Rotate the bowl clockwise until it locks in place, you will
hear a click when the lock is engaged. (Fig. 4)
5 The bowl can be placed on the motor base two ways;
Fig. 1
Fig. 5b
Blender System with Auto-
®
Fig. 2
Fig. 3
Fig. 6a
the handle can be on the front right corner or the front
left corner. (Fig. 5a, Fig. 5b)
6
Add the ingredients to the bowl, making sure that they
do not exceed the highest measured marking line on
the side of the bowl.
7
Holding the lid by the handle in the upright position,
place it on top of the Processor Bowl aligning the
triangle ( ) located on the lid with the triangle ( )
located on the Processor Bowl handle. (Fig. 6a) Press
the handle down until you hear a click.
The triangles on the lid and the Processor Bowl handle
MUST be aligned in order for the blender to turn on.
(Fig. 6b)
NOTE: The 64 oz. bowl is not intended for blending
drinks. Do not overfill.
8
Plug the power cord into the electrical outlet and press
the power button ( ).
NOTE: As a safety feature, the power button ( ) will
flash and the motor will not work if the bowl and lid
are not installed correctly. When the bowl and lid
are installed properly, the power button ( ) will be
solid, indicating that the appliance is ready for use.
www.ninjakitchen.com
Fig. 4
Fig. 6b
15