Ninja BL682 Guia Del Usuario página 16

Assembly and Use for the Processor Bowl - cont.
Use caution when handling the blade assemblies as the blades are very sharp.
USE
Fig. 1
USING THE CHOPPING BLADE ASSEMBLY
WARNING: Never leave the appliance unattended while
in use.
1
Holding the Chopping Blade assembly by the shaft,
place it onto the gear shaft inside the bowl. Ensure that
the attachment fits around the gear shaft and that it is
standing straight.
2 Add the ingredients and secure the bowl lid onto the
bowl. (Fig. 1)
3
Plug the power cord into the electrical outlet and press
on the power button ( ).
4
Select the speed or Auto-iQ
your needs. Pulse ingredients for even chopping by
holding the Auto-iQ
™
consistency is reached.
NOTE: Please refer to "Speed Settings & Uses" chart
for suggested uses and speeds.
5 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 2)
6
To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
7
Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
CAUTION: If pouring from the bowl, ALWAYS remove
the blade assembly first before pouring.
16 1-877-646-5288
Fig. 2
program that best suits
™
Pulse button until your desired
REMOVAL
Fig. 3
USING THE DOUGH BLADE
WARNING: Never leave the appliance unattended while
in use.
1
Place the motor base on a clean, dry, level surface such
as a counter or table top. (Fig. 4) Press down on the
motor base to adhere it to a counter or table top to give
the unit a better grip using the suction cups.
2
Secure the bowl onto the motor base.
3 Holding the dough blade by the shaft, place it onto the
gear shaft inside the bowl. Ensure that the attachment
fits around the gear shaft and that it is standing straight.
4
Add the ingredients and secure the bowl lid onto the bowl.
5
Plug the power cord into the electrical outlet and press
on the power button ( ). Select the speed that best
suits your needs.
NOTE: Please refer to "Speed Settings & Uses" chart
for suggested uses and speeds.
6
Once finished making dough, stop the appliance by
pressing the power button ( ) and wait for the blade to
stop turning. To remove the lid, press the release button
on the lid and pull the lid handle up to a 90° angle.
(Fig. 2)
7
Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
USE
Fig. 4