Care & Maintenance - Ninja BL682 Guia Del Usuario

Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base is unplugged
from the power source before inserting or removing any
attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into water or
any other liquid.
1
Separate/remove all parts from each other.
2 Clean the motor base with a damp cloth and wipe dry.
3 Place the blender pitcher, Nutri Ninja
processor bowl in the dishwasher. Place the lids and
attachments on the top rack. Use caution when
handling the blade assemblies as the blades are
very sharp.
NOTE: You may also wash the containers by filling ¾ of
the container with warm water and a drop of dish washing
detergent, placing the corresponding lid on the container
and pressing the Auto-iQ
clean, remove the container from the motor base. Rinse
the container, attachment and lid under running water.
Allow all the parts to dry before storing.
Please call customer service if any servicing needs to be
performed on the appliance at 1-877-646-5288.
20 1-877-646-5288
cup and food
®
Pulse button a few times. Once
™
HOW TO STORE
1 Store the Nutri Ninja
®
Auto-iQ Technology upright with the pitcher on the
™
motor base, 6-Blade assembly inside the pitcher and lid on
the pitcher. Do not place anything on top. Store the bowl
with the 4-Blade assembly inside and the lid on top. Store
the Nutri Ninja cup and the rest of the attachments
®
along side the appliance or in a cabinet where they will
not be damaged and won't cause a hazard.
RESETTING THE MOTOR THERMOSTAT
|
The Nutri Ninja Ninja
®
Auto-iQ Technology features a unique safety system
™
which prevents damage to the unit's motor and
drive system should you inadvertently overload your
appliance. If the appliance is being overloaded,
the motor will stop. Allow the appliance to
cool for approximately 15 minutes. To reset the
appliance, follow the resetting procedure below:
1 Unplug the appliance from the electrical outlet.
2
Remove and empty the container and ensure that no
food is jamming the cutting blades or attachments.
3
Allow the appliance to cool for approximately 15
minutes.
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
|
Ninja Blender System with
®
Blender System with
®