Parts Description; Operation And Maintenance - Tristar ST-8138 Manual De Usuario

Instruction manual
• Unplug the appliance from the socket when you are not using it.
• Note: To avoid danger by accidental resetting the thermal protection,
this appliance may not be powered through an external switching
device, such as a timer, or connected to a circuit that regularly will be
switched on or off.
• Make sure that the cord is not hanging over the edge of the table or
counter, does not touch any hot surfaces or is coming directly into
contact with the hot parts of the appliance. Do not place the appliance
underneath or close to curtains, window coverings etc.
• Make sure the cord does not touch the hot parts of the appliance.
* Competent qualified repair service: after sales department of the producer
or importer or any person who is qualified, approved and competent to
perform this kind of repairs in order to avoid all danger. In any case you
should return the appliance to this repair service.

PaRTS DeSCRIPTIoN

1. Thermostat
2. Water filling mouth
3. Steam switch
4. Spraying nozzle
5. Movable wire
6. Spray button
7. Control light
8. Soleplate
9. Water tank
8
4
5
6
7
3
2
4
9

oPeRaTIoN aND maINTeNaNCe

• Remove all packaging of the device.
• Check if the voltage of the appliance corresponds to the main voltage
of your home. Rated voltage : AC220-240V 50Hz.
• Filling your iron with water
• Before filling water, please pull out the wall outlet and turn the thermostat
to the "min" position. Fill with cold tap water to maximum level, please be
aware not to overfill.
• Never add other liquids to the water!
• The radius of the exhaust steam is very powerful, so make sure you do
not focus on people, pets or delicate points. 1
The use of your iron without steam
• Turn the steam switch to the O position (No.1)
• Set the switch on the iron to the desired position From MIN to MAX.
• On the label in your garment you can find the correct position which
is appropiate for the garment. See the schedule for the meaning of the
standings.
• The control light turns off if the desired temperature is reached. 4
• To remove stubborn wrinkles, you can press the spray button to
• bring your ironing to moisten. Turn the spray button right to spray.
The use of your iron with steam
• Turn the steam switch to position 2 or position 4 for more steam.
• Set the thermostat on the iron to the desired position of MIN to MAX.
• On the label in your garment, you can find the correct position which
1
is appropiate for the garment. See the scedule for the meaning of the
standings.
• The control light turns off if the desired temperature is reached.