Operation And Maintenance; Parts Description - Tristar ST-8227 Manual De Usuario

Ocultar thumbs Ver también para ST-8227:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
Instruction manual
• Unplug the appliance from the socket when you are not using it.
• Note: To avoid danger by accidental resetting the thermal protection,
this appliance may not be powered through an external switching
device, such as a timer, or connected to a circuit that regularly will be
switched on or off.
• Make sure that the cord is not hanging over the edge of the table or
counter, does not touch any hot surfaces or is coming directly into
contact with the hot parts of the appliance. Do not place the appliance
underneath or close to curtains, window coverings etc.
• Make sure the cord does not touch the hot parts of the appliance.
* Competent qualified repair service: after sales department of the producer
or importer or any person who is qualified, approved and competent to
perform this kind of repairs in order to avoid all danger. In any case you
should return the appliance to this repair service.

PaRTS DeScRIPTIoN

1. Thermostat
2. Water filling mouth
3. Steam switch
4. Spraying nozzle
5. Movable power cord
6. Spray button
6
7. Steam button
3
8. Water tank
2
9. Soleplate
10
10. Anti calc button
4
11. Control light
4

oPeRaTIoN aND maINTeNaNce

• Remove all packaging of the device. Remove the plastic layer of the
soleplate (no. 9).
• Check if the voltage of the appliance corresponds to the main voltage
of your home. Rated voltage : AC220-240V 50Hz.
FIllINg youR IRoN wITh waTeR
• Before filling water, please pull out the power cord out off the wall
outlet and turn the thermostat (No.1) to the MIN position. Fill the water
tank (No. 8) with cold tap water to maximum level, please be aware not
to overfill. Never add other liquids to the water!
• The radius of the exhaust steam is very powerful, so make sure you do
not focus on people, pets or delicate points.
uSe oF youR IRoN wIThouT STeam
• Turn the steam switch (No. 3) to the off position.
• Set the thermostat switch (No. 1) on the iron to the desired position
from MIN to MAX. The red indicator light (No. 11) lights up, if the
5
selected temperature is reached the control light goes off.
• On the label in your garment you can find the correct thermostat
7
position which is
• appropiate for the garment. See the schedule for the meaning of the
11
thermostat standings.
1
• To remove stubborn wrinkles, you can press the spray button (No. 6) to
8
bring your ironing to moisten.
9

Publicidad

Tabla de contenido
loading

Tabla de contenido