Toyotomi zibro LC – 320 Instrucciones De Uso página 15

GENERAL DIRECTIONS FOR USE
Below you will find the main steps to be taken for using your
heater. For more details, please refer to the MANUAL.
1
Remove all packaging materials (refer to Section A, Fig. A).
2
ill the removable tank
3
Insert the plug into the
4
Ignite the heater using the
5
If re uired, change the temperature using the adjustment keys
(refer to Section F).
6
S itch off the heater by pressing the
• As a fire precaution, the tank must be filled either
been switched off or in another room than the room where the heater is
installed.
• Al ays ensure that the tank is closed properly after filling it at a safe
distance from all sources of heat and open flames (see Section B).
• The first time the heater is ignited it
• Store all fuel containers
dark place.
• uel ages. Use ne
• Only use high uality and
local legislation (TOYOTOMI fuel).
• Before changing brands and/or types of fuel make sure that the mobile
heater first completely empties all of the remaining fuel inside the heater.
(refer to Section B, Fig. C).
all-socket.
key ¹ (refer to Section E).
key ¹.
ill smell like "ne " for a short time.
ith their original caps and seals in a cool and
fuel at the start of every heating season.
ater-free pure paraffin in accordance
hen the heater has
ith
4
3