Textron JACOBSEN 744853D Manual Tecnico página 11

(Single Tine Part Numbers)
515196 - 1/2" Coring Tine
515197 - 3/4" Coring Tine
These tines are used for thorough aeration programs
in the Spring and Fall. Soil cores up to 4" (102mm)
in length can be removed with minimal surface
disturbance.
(Single Knife Part Numbers)
521155 - Deep Slicing Knife
515193 - Shallow Slicing Knife
Slicing knives are used for aeration and renovation
programs during all seasons. Slicing knives control
thatch by cutting through grass runners and also
have the advantage of no surface clean up after
aerating. Knives are especially helpful in that they
do not place buried seeds of noxious weeds on the
surface where they can germinate.
Slicing knives are especially recommended for
athletic fields. Slicing allows moisture, air and
fertilizer to be absorbed while not creating hazardous
playing conditions for athletes.
(Single Tine Part Number)
520404 - Aerating Tine
These tines are for turf building and Fall renovation
programs. These tines will thoroughly open up the
soil by penetrating deep into the ground bringing up
large amounts of soil, which then becomes top
dressing.
AERATING TOOLS