Fan Operating Instructions - Allen + Roth LP8075LBN Manual Del Usuario

FAN OPERATING INSTRUCTIONS

1. Restore electrical power to the outlet box by
turning the electricity on at the main fuse box.
(Fig.1)
WARNING
Check to see that all connections are
tight, including ground, and that no bare
wire is visible at the wire connectors,
except for the ground wire. Do not
operate fan until the blades are in place.
Noise and fan damage could result.
2. To make fan operational, install 12-volt battery
(supplied in remote control bag) to remote (H).
(Fig. 2)
CAUTION
If not using for long periods of time, remove
battery to prevent damage to remote, and
store the remote away from excess heat or
humidity.
3. The remote (H) includes five buttons for high,
medium and low fan speeds as well as fan off
and light on/off. Varying light levels are
available by holding down the light on/off
button. (Fig. 3)
1
2
3
15
ON ON
ON ON
ON ON
ON ON
12V BATTERY
H
H