Husqvarna TS 142 Manual De Operario
Ocultar thumbs Ver también para TS 142:

Publicidad

Idiomas disponibles

Idiomas disponibles

Operator's Manual
Gasoline containing up to 10% ethanol (E10) is accept-
able for use in this machine. The use of any gasoline ex-
ceeding 10% ethanol (E10) will void the product warranty.
Manual de Operario
Esta máquina puede utilizar gasolina con un contenido
de hasta el 10% de etanol (E10). El uso de una gasolina
TS 142
que supere el 10% de etanol (E10) anulará la garantía
del producto. the product warranty.
Please read the operator's manual carefully and make sure
you understand the instructions before using the machine.
Por favor lea cuidadosamente y comprenda
114 19 88-49
English/Spanish
estas intrucciones antes de usar esta maquina.

Publicidad

Capítulos

Tabla de contenido
loading

Resumen de contenidos para Husqvarna TS 142

  • Página 1 Manual de Operario Esta máquina puede utilizar gasolina con un contenido de hasta el 10% de etanol (E10). El uso de una gasolina TS 142 que supere el 10% de etanol (E10) anulará la garantía del producto. the product warranty.
  • Página 2: Safety Rules

    SAFETY RULES Safe Operation Practices for Ride-On Mowers DANGER: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. • Be alert and turn machine off if a child enters the area. WARNING: In order to prevent ac ci den tal •...
  • Página 3 SAFETY RULES Safe Operation Practices for Ride-On Mowers III. SLOPE OPERATION • Never remove gas cap or add fuel with the engine running. • Allow engine to cool before refueling. WARNING! When loading or unloading • Never fuel the machine indoors. this machine, do not exceed the maximum •...
  • Página 4: Tabla De Contenido

    SUPPORT / HELP If you require assistance or have questions concerning the application, operation, maintenance or parts for your product: • Visit our website: www.husqvarna.com • Call Us Toll Free: 1-800-487-5951 TABLE OF CONTENTS MAINTENANCE ............. 15-19 SAFETY RULES ............
  • Página 5: Assembly

    UNASSEMBLED PARTS Battery Slope Sheet Keys (2) Nut Keps (1) Oil Drain Tube (2) Hex Bolts For Future Use (2) Keys *Installed by Dealer (1) Quick Connect *Brush Guard Kit ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. TOOLS REQUIRED FOR ASSEMBLY •...
  • Página 6 ASSEMBLY • Assemble large fl at washer, lock washer, hex bolt and NOTE: All three pads will not install at the same time. The tighten se cure ly. middle pad must be installed fi rst before other pads will align with assembly holes. •...
  • Página 7 ASSEMBLY ✓ NOTE: You may now roll your tractor off the skid. Continue CHECKLIST using the instructions that follow to remove the tractor from the skid. BEFORE YOU OPERATE YOUR NEW TRAC TOR, WE WARNING: Before start ing, read, un der stand and fol- WISH TO ENSURE THAT YOU RECEIVE THE BEST low all in struc tions in the Op er a tion section of this man u al.
  • Página 8: Operation

    OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. REVERSE NEUTRAL HIGH CHOKE FAST SLOW IGNITION SWITCH ENGINE ENGINE ENGINE DIFFERENTIAL CLUTCH/ PARKING MOWER MOWER START LOCK BRAKE PEDAL BRAKE HEIGHT LIFT...
  • Página 9 OPERATION KNOW YOUR TRACTOR READ THIS MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference. Fig. 6 Our tractors conform to the applicable safety standards of the American National Standards Institute.
  • Página 10 OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while operating your tractor or per form ing any ad just ments or repairs. We rec om mend standard safety glasses or a wide vision safety mask worn over spectacles.
  • Página 11 OPERATION TO ADJUST GAUGE WHEELS (See Fig. 12) Gauge wheels are prop er ly ad just ed when they are slight ly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in prop- er position to help prevent scalping in most terrain conditions.
  • Página 12 OPERATION REVERSE OPERATION SYSTEM (ROS) TO TRANSPORT (See Fig. 15) (See Fig. 14) When push ing or tow ing your trac tor, ensure transmission is disengaged by placing freewheel control in free wheel ing Your tractor is equipped with a Reverse Operation System po si tion.
  • Página 13 OPERATION BEFORE STARTING THE ENGINE TO START ENGINE (See Fig. 6) When starting the engine for the fi rst time or if the engine CHECK ENGINE OIL LEVEL has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine.
  • Página 14 OPERATION PURGE TRANSMISSION MOWING TIPS • DO NOT use tire chains when the mower hous ing is CAUTION: Never engage or disengage free- attached to tractor. wheel lever while the engine is run ning. • Mower should be properly leveled for best mowing performance.
  • Página 15: Maintenance Schedule

    MAINTENANCE BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE MAINTENANCE SCHEDULE EACH SEASON STORAGE HOURS HOURS HOURS HOURS Check Brake Operation Check Tire Pressure Check Operator Presence and ROS Systems Check for Loose Fasteners Check/Replace Mower Blades Lubrication Chart Check Battery Level Clean Battery and Terminals Clean Debris off Steering Plate Check Transaxle Cooling...
  • Página 16: Maintenance

    MAINTENANCE TRACTOR BLADE CARE For best results mower blades must be kept sharp. Re place Always observe safety rules when per form ing any bent or damaged blades. main te nance. BRAKE OPERATION CAUTION: Use only a replacement blade ap- proved by the manufacturer of your tractor.
  • Página 17 MAINTENANCE V-BELTS TO CHANGE ENGINE OIL (See Fig. 19 & 20) Check V-belts for deterioration and wear after 100 hours Determine temperature range expected before oil change. of operation and replace if necessary. The belts are not All oil must meet API service classifi cation SJ-SN. ad just able.
  • Página 18 MAINTENANCE CLEANING AIR FILTER Your engine will not run properly using a dirty air fi lter. • Clean engine, battery, seat, fi nish, etc. of all foreign Service air cleaner more often under dusty conditions. matter. See engine manual. • Clean debris from steering plate.
  • Página 19 MAINTENANCE HOSE NOZZLE ADAPTER WASHOUT PORT Fig. 23 IMPORTANT: Tug hose ensuring connection is secure. 5. Turn the water on. 6. While sitting in the operator’s position on the tractor, re-start the engine and place the throttle lever in the Fast "...
  • Página 20: Service And Adjustments

    SERVICE AND ADJUSTMENTS WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER VICE OR AD JUST MENTS: • Depress brake pedal fully and set parking brake. • Place attachment clutch in “DISENGAGED” position. • Turn ignition key to “STOP” and remove key. •...
  • Página 21 SERVICE AND ADJUSTMENTS • ATTACH MOWER SIDE SUSPENSION ARMS (A) TO • ATTACH FRONT LINK (E) - Work from left side of CHASSIS - Position hole in arm over pin (B) on outside tractor. Insert rod end of link assembly through front of tractor chassis and secure with retainer spring.
  • Página 22 SERVICE AND ADJUSTMENTS TO LEVEL MOWER FRONT-TO-BACK ADJUSTMENT (See Figs. 32 & 33) IMPORTANT: Deck must be level side-to-side. Ensure tires are properly infl ated to the PSI shown on tires. If tires are over or under infl ated, it may affect the appear- To obtain the best cutting re sults, the mower blades should ance of your lawn and lead you to think the mower is not be adjusted so the front tip is 1/8"...
  • Página 23 SERVICE AND ADJUSTMENTS TO REPLACE MOWER BLADE DRIVE BELT TO REPLACE MOTION DRIVE BELT (See Fig. 34) (See Fig. 35) MOWER DRIVE BELT REMOVAL Park the tractor on level surface. En gage parking brake. • Park tractor on a level surface. En gage parking brake. For as sis tance, there is a belt installation guide decal on bottom side of left footrest.
  • Página 24 SERVICE AND ADJUSTMENTS TO START ENGINE WITH A WEAK BATTERY BELT INSTALLATION - (See Fig. 37) 1. Install new belt from tractor rear to front, over the steer- ing plate (H) and above clutch brake pedal shaft (J). 2. Pull belt toward front of tractor and roll belt around WARNING: Lead-acid batteries gen er ate ex- electric clutch and onto engine pulley (G).
  • Página 25 SERVICE AND ADJUSTMENTS REPLACING BATTERY (See Fig. 38) TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 39) WARNING: Do not short battery ter mi nals • Raise hood. by allowing a wrench or any other object • Unsnap headlight wire connector. to contact both terminals at the same time.
  • Página 26: Storage

    STORAGE ENGINE Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. FUEL SYSTEM IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS WARNING: Never store the trac tor with FROM FORMING IN ES SEN TIAL FUEL SYSTEM PARTS SUCH gas o line in the tank inside a building AS CARBURETOR, FUEL FIL TER, FUEL HOSE, OR TANK...
  • Página 27: Troubleshooting

    TROUBLESHOOTING PROBLEM CAUSE CORRECTION 1. Out of fuel. 1. Fill fuel tank. Will not start 2. Engine not “CHOKED” properly. 2. See “TO START ENGINE” in Operation section. 3. Engine fl ooded. 3. Wait several minutes before attempting to start. 4.
  • Página 28 TROUBLESHOOTING PROBLEM CAUSE CORRECTION Engine continues to 1. Faulty operator-safety presence control 1. Check wiring, switches and connections. If not system. corrected, contact an authorized service center/ run when operator department. leaves seat with attachment clutch CAUTION: DO NOT operate machine until engaged problem is corrected.
  • Página 30: Español

    REGLAS DE SEGURIDAD Prácticas de Operación Seguras para las Segadoras Conducibles PELIGRO: ESTA MAQUINA CORTADORA ES CAPAZ DE AMPUTAR LAS MANOS Y LOS PIES Y DE LANZAR OBJETOS. SI NO SE OBSERVAN LAS INSTRUCCIONES DE SEGURIDAD SIGUIENTES SE PUEDEN PRODUCIR LESIONES GRAVES O LA MUERTE. •...
  • Página 31 REGLAS DE SEGURIDAD Prácticas de Operación Seguras para las Segadoras Conducibles • Mantener la máquina libre de hierba, hojas u otros es- • Apagar todos los cigarrillos, cigarros, pipas y otras fuentes combros que pueden tocar el tubo de escape / partes del de ignición.
  • Página 32: Especificaciones Del Producto

    SOPORTE/AYUDA Si necesita asistencia o tiene alguna pregunta acerca de la aplicación, operación, mantenimiento o piezas de su producto: • Visite nuestro sitio web: www.husqvarna.com • Llámenos de manera gratuita al: 1-800-487-5951 TABLA DE MATERIAS TABLA DEL MANTENIMIENTO ...........
  • Página 33: Montaje/Pre Operación

    PEDAZOS PARA LA MONTAJE Batería Hoja de inclinación Llaves (1) Tubo de drenaje de aceite para uso futuro (2) Pernos (2) Tuerca Keps hexagonales *Instalado por el 2) Llaves (1) Conexión distribuidor rápida *Kit de parachoques MONTAJE Su tractor nuevo ha sido montado en la fábrica con la excepción de aquellas partes que no se han montado por razones de envío. HERRAMIENTAS NECESARIAS PARA EL •...
  • Página 34 MONTAJE • Encaje el encastre del volante en el centro del volante. NOTA: Las tres almohadillas no se instalan al mismo tiempo. La almohadilla media se debe instalar primero antes que las otras • Retire los materiales protectores de la capota y la parrilla almohadillas se alineen con los orifi...
  • Página 35 MONTAJE ✓ AVISO: Ahora puede sacar el tractor de la tarima. Continúe usando las instrucciones que siguen para retirar el tractor de la tarima. LISTA DE REVISIÓN ADVERTENCIA: Antes de empezar, leer, entender y seguir ANTES DE OPERAR Y DE DISFRUTAR DE SU TRACTOR todas las instrucciones presentes en la sección Operaciones NUEVO, LE DESEAMOS QUE RECIBA EL MEJOR RENDIMIENTO Y LA MAYOR SATISFACCION DE ESTE...
  • Página 36: Operación

    OPERACIÓN Estos símbolos pueden aparecer sobre su tractor o en la literatura proporcionada con el producto. Aprenda y comprenda sus signifi cados. MARCHA NEUTRO ALTO BAJO ESTRANGU- RÁPIDO LENTO INTERRUPTOR ATRÁS LACIÓN DE IGNICIÓN MOTOR MOTOR MOTOR EL CIERRE PEDAL DE FRENO DE ALTURA LEVANTA-...
  • Página 37 OPERACIÓN FAMILIARICESE CON SU TRACTOR LEA ESTE MANUAL DEL OPERARIO Y LAS REGLAS DE SEGURIDAD ANTES DE OPERAR SU TRACTOR Compare las ilustraciones con su tractor para familiarizarse con las ubicaciones de los diversos controles y ajustes. Guarde este manual para referencia en el futuro. Fig.
  • Página 38 OPERACIÓN La operación de cualquier tractor puede hacer que salten objetos extraños dentro de sus ojos, lo que puede producir daños graves en éstos. Siempre use anteojos de seguridad o pro tec cio nes para los ojos mientras opere su tractor o cuando haga ajustes o reparaciones. Recomendamos gafas de seguridad o una máscara de visión amplia de seguridad usada sobre las gafas.
  • Página 39 OPERACIÓN AVISO: Ajuste las ruedas calibradoras con el trac tor en una superfi cie ni ve la da plana. Ajuste la segadora a la altura de corte deseada con la manilla de ajuste de altura. (Vea “PARA AJUSTAR LA ALTURA DE CORTE DE LA SEGADORA”...
  • Página 40 OPERACIÓN FUNCIONAMIENTO ATRÁS (ROS) (Vea Fig. 14) PARA TRANSPORTAR (Vea Fig. 15) Cuando empuje o arrastre su tractor asegúrese de desenganchar Tu tractor está equipado con el Sistema de Funcionamiento Atrás (ROS). Cualquier tentativa del operador de viajar marcha atrás la transmisión poniendo el control de la rueda libre en la posición con el embrague puesto apagará...
  • Página 41 OPERACIÓN ANTES DE HACER ARRANCAR EL MO TOR PARA HACER ARRANCAR EL MOTOR (Vea Fig. 6) Al hacer arrancar el motor por la primera vez o si se ha acabado REVISE EL NIVEL DE ACEITE DEL MOTOR el combustible del motor, se necesitará tiempo para el arranque El motor de su tractor se envía de fábrica ya lleno con aceite de extra para mover el combustible desde el estanque hasta el motor.
  • Página 42 OPERACIÓN CONSEJOS PARA SEGAR PURGAR LA TRANSMISIÓN • NO use cadenas de llanta cuando la carcasa de la cortadora PRECAUCIÓN: Nunca enganche o desen- de césped esté colocada en el tractor. ganche la palanca del control de rue da libre •...
  • Página 43: Tabla Del Mantenimiento

    MANTENIMIENTO ANTES CADA CADA CADA CADA CADA ALMACEN- PROGRAMA DE MANTENIMIENTO DE CADA TEMP- AMIENTO HORAS HORAS HORAS HORAS ORADA Revisar la operación del freno Revisar la presión de las llantas Verificar la sistemas presencia del operador y sistemas "ROS" Revisar si hay sujetadores sueltos Afilar/cambiar las cuchillas de la segadora Tabla de lubricación...
  • Página 44 MANTENIMIENTO TRACTOR PRECAUCIÓN: Usar solamente la hojas de repues- Siempre observe las reglas de seguridad cuando dé mante ni- to aprobada por el fabricante de su cortacésped. mien to. Usar una hoja no aprobada por el fabricante de su cortacésped es peligroso, puede dañar su OPERACIÓN DEL FRENO cortacésped y anular su garantía.
  • Página 45 MANTENIMIENTO PARA CAMBIAR EL ACEITE DEL MOTOR CORREAS "V" (Vea Fig. 19 y 20) Revise las correas "V" para verifi car si existe deterioro y desgaste después de 100 horas de operación y cámbielas si es necesario. Determine la gama de la temperatura esperada antes de cambiar Las correas no son ajustables.
  • Página 46 MANTENIMIENTO LIMPIEZA FILTRO DEL AIRE Su motor puede sufrir averías y funcionar de manera incorrecta • Limpie todo material extraño del motor, la batería, el asiento, con un fi ltro del aire sucio. Déle servicio al fi ltro de aire más a el pulido, etc.
  • Página 47 MANTENIMENTO PUERTO DE LAVADO DE LA CUBIERTA (Vea Fig. 23) La plataforma del tractor está equipada con un puerto de lavado como parte del sistema de lavado de la plataforma. Se debe utilizar después de cada uso. Lleve el tractor a un lugar horizontal y despejado de su césped, lo bastante cerca de una boca de riego como para que llegue la manguera del jardín.
  • Página 48: Servicio Y Ajustes

    SERVICIO Y AJUSTES ADVERTENCIA: PARA EVITAR LESIÓNES SERIAS, ANTES DE DAR CUALQUIER SERVICIO O DE HACER AJUSTES: • Presione el pedal del embrague/freno completamente y aplique el freno de estacionamiento. • Ponga el embrague del accesorio en la posición desenganchado (DISENGAGED). •...
  • Página 49 SERVICIO Y AJUSTES • FIJE LOS BRAZOS DE SUSPENSIÓN LATERALES DE LA • CONECTE LA CONEXION ANTERIOR (E) - Trabajo del dejó CORTADORA (A) AL CHASIS - Ubique el orifi cio del brazo el lado de tractor. Meta el fi n de la barra de la asamblea de encima de la clavija (B) que hay en la parte exterior del chasis la conexión por orifi...
  • Página 50 SERVICIO Y AJUSTES PARA NIVELAR LA SEGADORA AJUSTE DE DELANTE A ATRÁS (Vea Fig. 32 y 33) Asegúrese de que los neumáticos estén infl ados a la PSI que se IMPORTANTE: El piso debe quedar bien nivelado de lado a lado. indica en estos.
  • Página 51 SERVICIO Y AJUSTES PARA CAMBIAR LA CORREA DE LA CUCHILLA DE LA PARA CAMBIAR LA CORREA DE IMPULSIÓN DE MOVIMIENTO (Vea Fig. 35) SEGADORA (Vea Fig. 34) Estacione el tractor en una superfi cie nivelada. Ponga el freno REMOCIÓN DE LA CORREA de mano.
  • Página 52 SERVICIO Y AJUSTES MONTAJE DE LA CORREA PARA HACER ARRANCAR EL MOTOR CON UNA 1. Instale la correa nueva pasándola de la parte de atrás a la BATERÍA BAJA (Vea Fig. 37) parte de adelante del tractor, por encima de la placa de direc- ción (H) y del vástago del pedal del embrague / freno (J).
  • Página 53 SERVICIO Y AJUSTES REEMPLAZAR LA BATERIA (Vea Fig. 38) PARA REMOVER EL CONJUNTO DEL CAPÓ Y DEL ENREJADO (Vea Fig. 39) ADVERTENCIA: No haga cortocircuito con los 1. Levante el capó. terminales de la batería al permitir que una 2. Desabroche el conector del alambre de las luces delanteras. llave de tuerca o cualquier otro objeto entre 3.
  • Página 54: Almacenamiento

    ALMACENAMIENTO MOTOR Inmediatamente prepare su tractor para el almacenamiento al fi nal de la temporada o si el tractor no se va a usar por 30 días o más. SISTEMA DE COMBUSTIBLE IMPORTANTE: Es important evitar que se forman depositos Advertencia: Nunca almacene el tractor con de goma en partes fundamentales del sistema de combus-tible gasolina en el estanque dentro de un edifi...
  • Página 55: Identificación De Problemas

    IDENTIFICACIÓN DE PROBLEMAS PROBLEMA CAUSA CORRECCIÓN No arranca Sin combustible. Llene el estanque de combustible. Motor sin la “ESTRANGULACIÓN” (CHOKE) Vea “PARA HACER ARRANCAR EL MOTOR” en la sec- adecuada. ción de operación. Motor ahogado. Espere varios minutos antes detratar de arrancar. Bujía mala.
  • Página 56 IDENTIFICACIÓN DE PROBLEMAS PROBLEMA CAUSA CORRECCIÓN El motor continúa Sistema de control que exige la presencia del Revise el alambrado, los interruptores y la conexiones.Si operador –seguridad fallado. no están correctas, pongase en contacto con un centro funcionando cuando de servicio cualifi cado. el operador se baja del asiento con el PRECAUCIÓN: NO opere la máquina sino hasta haber...
  • Página 58 SERVICE NOTES/AVISO...
  • Página 59 SERVICE NOTES/AVISO...
  • Página 60 09.20.19 CL Printed in U.S.A.

Tabla de contenido