Wipe Protection; Switching On; Switching Off; Energy Consumption Indicator - NEFF N74TD00N0 Instrucciones De Uso

Wipe protection

en
kWipe protection
I f you wipe over the control panel while the appliance is
W i p e p r o t e c t i o n
switched on, settings may be altered.
To prevent this from happening, your appliance has a
wipe protection function.

Switching on

Touch the symbol when the appliance is switched
z
on.
An audible signal sounds. The indicator light above the
symbol lights up. The control panel is locked for
z
30 seconds. You can now wipe over the control panel
without altering any settings.
Note: The main switch is excluded from the wipe
protection function. You can switch off the appliance at
any time.

Switching off

Touch the symbol.
z
The wipe protection function is switched off.
12
[Energy consumption
indicator
Y ou can use this function to display the total energy
E n e r g y c o n s u m p t i o n i n d i c a t o r
consumption between switching the appliance on and
off.
Once switched off, the energy consumption in kilowatt
hours (e.g. 1.87 kWh) is displayed for 10 seconds.
The accuracy of the display depends, amongst other
things, on the voltage quality of the power supply.
The energy consumption display may not be
activated.~ "Basic settings" on page 13