Naterial NORI 2 LED Instrucciones De Montaje, Utilización Y Mantenimiento página 87

A horizontal distance of at least 0,4 m is to
be maintained between the fully unrolled driven part and any permanent
object.Before installing the appliance, remove the unnessary cord and dis
able any equipment not needed for power operation.
The actuating member of a biased-off switch is to be located within direct
sight of the driven part but away from moving parts. It is to be installed at
a minimum height of 1,5 m and not accessible to
the public.
1. GENERAL
WARNING: Important safety instructions. Please follow all the
instructions because a faulty setup may result in serious injuries.
Follow all safety instructions to avoid damage through improper use! Follow all warning
notices on the appliance.
Keep this instruction manual for future use. Should this appliance be passed on to a third
party, this instruction manual must be included.
Use this appliance only for its intended use.
No responsibility is accepted for damage resulting from improper use or non-compliance with
these Instructions.
2. ASSEMBLY
The installation must be conform to the regulation of the country.
A horizontal distance of at least 0.4 m is to be maintained between fully unrolled driven part
and any permanent object.
Means for disconnection having a contact separation in all poles must be incorporated in the
xed wiring in accordance with the wiring rules.
When you are ready to unpack and assemble the awning, make sure that you have the
87
FR
ES
PT
IT
EL
PL
UA
RO
EN