Preventative Maintenance - DeVilbiss FLG-P5 Manual De Instrucciones

Table 1 – Fluid Nozzle Range & Fluid Needle
PART No. ON FLUID NOZZLE
SGK-0013-11
SGK-0012-14
1. Turn off air and coating supply and relieve pressure in the supply lines, or if using QD
system, disconnect from airline and fluid line.
2. Remove air cap (1) & (2) and clean. If any of the holes in the cap are blocked with coating
material use a toothpick to clean. Never use metal wire which could damage the cap and
produce distorted spray patterns
3. Ensure the tip of the nozzle (3) is clean and free from damage. Build up of dried paint can
distort the spray pattern.
4. Lubrication – stud (24), needle (16) and air valve (13) should be oiled each day.
PART No. NEEDLE
SGK-0402-11
SGK-0402-14

Preventative Maintenance

6
© 2016 Carlisle Fluid Technologies, dba Finishing Brands UK Ltd.