Maintenance - Stihl RE 98 Manual De Instrucciones

Ocultar thumbs Ver también para RE 98:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 88

Maintenance

Always unplug the power cord before
servicing or cleaning the machine.
In order to ensure trouble free operation,
we recommend carrying out the
following steps whenever the machine is
used:
Rinse the water hose, high-
N
pressure hose, spray lance and
accessories with water before fitting
them
Remove all sand and dust from the
N
couplings
Rinse out the spray set after use
N
Cleaning the high-pressure nozzle
Since the pump pressure increases if
the nozzle is clogged, it must be cleaned
immediately.
Switch off the machine
N
Actuate the spray gun until water
N
merely drips from the spray head –
the machine is now depressurized
Remove the nozzle
N
Clean the nozzle with the cleaning
N
pin
RE 98
NOTICE
Always remove the nozzle before
cleaning it
Rinse the nozzle with water from the
N
front
Cleaning the water intake screen
The water intake screen must be
cleaned once per month or more often if
necessary.
2
1
Disconnect hose connector (1).
N
Carefully release the strainer (2)
N
with pliers and rinse it.
Before refitting the strainer, ensure
N
that it is undamaged and replace if
necessary
Cleaning the ventilation openings
The machine must be kept clean so that
cooling air can flow freely through the
openings in the machine.
Greasing couplings
The couplings on the spray gun for
connecting the high-pressure hose and
the spray lance must be greased as
required.
English
47

Publicidad

Tabla de contenido
loading

Tabla de contenido