Dash Disassembly - Metra 95-7802CH Instrucciones De Instalación

1. Unclip and remove the a/c vents
from either side of the factory
radio. (Figure A)
2. Remove (4) Phillips screws
securing the radio. (Figure B)
3. Remove (2) Phillips screws
securing the factory hazard button
to the factory radio trim panel.
(Figure C)
4. Remove the (6) panel clips from
the factory radio trim panel and
save for Kit Assembly.
Continue to kit assembly
95-7802CH

Dash Disassembly

(Figure A) (Figure B)
(Figure C)
2