Horizon Fitness 7.8 AT Manual Del Propietário página 11

ASSEMBLY STEP 2
HARDWARE FOR STEP 2
PART TYPE
F ARC WASHER
G
SHORT BOLT
H LONG BOLT
6
F
G
H
4
DESCRIPTION QTY
8.2x18x1.5T 4
M8x1.25Px15L 2
M8x1.25Px70L 2
2
7
4
A Open HARDWARE FOR STEP 2.
B Have someone help hold the console while attaching
the CONSOLE CABLE (2). Use the lead wire to
carefully pull the CONSOLE CABLE (2) out of the
RIGHT CONSOLE MAST (4). Attach the CONSOLE
CABLE (2) from the CONSOLE (6) to the CONSOLE
CABLE (2) from the top of the RIGHT UPRIGHT MAST
(4). Detach and discard the lead wire.
C Carefully slide the CONSOLE (6) onto the ATTACHMENT
BRACKETS (7) being careful not to pinch the
CONSOLE CABLE (2). Align the holes on the bottom
side of the CONSOLE (6) with the holes on the
ATTACHMENT BRACKETS (7).
Attach the CONSOLE (6) to the ATTACHMENT BRACKETS
D
(7) by first placing ARC WASHERS (F) onto BOLTS (G)
AND (H) as illustrated. Insert SHORT BOLTS (G) into
the top hole of the ATTACHMENT BRACKET (7) and
LONG BOLTS (H) into the bottom hole.
E Repeat STEP D for the opposite side.
F
11
G H