Instructions Of Use - Jata electro EV105 Instrucciones De Uso

Envasadora selladora al vacío
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

INSTRUCTIONS OF USE

• Always use original spare parts.
I. Making a bag with a plastic
roll
1. Connect the appliance to the
mains.
2.Use the scissors to cut a bag, to the desired length, from the plastic roll - Fig.1
3. Place the end of the bag on the sealing strip, without going into the vacuum chamber. Fig.2
4. Close the top cover and press tightly until you hear a click on both sides. Fig.3
5. Presses the "sealing" "sellado" button to start sealing the bag. Fig.4
6. Press the open buttons to open the cover and remove the bag. The bag will then be ready for
vacuuming and sealing. Fig.5
4.Press the cover downwards, using two hands, until hearing a click on both sides of the appliance.
Fig.2
5.Check the state of the indicator light of the "Food" and "Suction" button to confirm the sealing
time depending on the product to be sealed (sauces or dry food) and the desired sealing pressure
(Normal/Smooth) according to the type of food.
6.Press the Vacuum + Sealing button, the appliance will begin vacuuming and sealing the bag
automatically. Fig 3
II. Vacuum packaging with bag
1. Place the items inside the bag. Use
only the special bags supplied with
vacuum channels.
2. Clean and stretch the opening of the
bag, ensure that there is no dust, waves
or wrinkles and have in mind that the
sealing area is totally dry.
3. Place the opening of the bag inside
the vacuum chamber. Ensure that the
air intake is not covered by the bag.
Fig 1
11

Publicidad

Tabla de contenido
loading

Tabla de contenido