Maintenance Schedule - Ryobi RLM4614 Traducción De Las Instrucciones Originales

MAINTENANCE SCHEDULE

Check engine oil
Change engine oil
Check air fi lter
Clean air fi lter
Change air fi lter
Replace the fuel fi lter
Check/adjust spark plug
Replace spark plug
Check/adjust idle speed
Check/adjust valve
clearance*
Clean fuel tank and fi lter*
Check fuel tube
Check for worn or
damaged parts
Check all starting
interlock and operator
presence control for
proper functionality
Check if the blade stops
within 3 seconds after
releasing the operator
presence control
* These items should only be carried out by an authorised service center.
NOTE: Maintenance should be performed more frequently when the product is used in dusty areas.
When the engine has exceeded the maximum figures specified in the table, maintenance should still be cycled
according to the intervals of time or hours stated herein.
10
All manuals and user guides at all-guides.com
After 1st month
Before
or 20 hours of
each use
operation






Every 3 months Every 6 months
or 50 hours of or 100 hours
operation of operation





English
Every 12 months
or after 300 hours
of operation




