Finishing The Installation - D-Link DGE-530T Guía De Instalación Rápida

F. Secure the DGE-530T with the screw from the back plate.
G. Replace your computer's cover.

Finishing the Installation

A. Reconnect the power cord and power on the computer
B. If prompted to restart (for Microsoft Windows 98/ME only), click "Yes".
Troubleshooting
1. If I've lost my CD, what can I do?
The CD contains software drivers and manual which can be obtained from D-Link (see
Technical Support pages). Windows 2000 or XP in most cases will automatically install the
correct drivers.
2. What do I do if the installed card does not
seem to function properly?
• Check that the card appears under
START>CONTROL PANEL>SYSTEM
>HARDWARE>DEVICE MANAGER
>NETWORK ADAPTERS.
• If it does not appear, make sure you have inserted
the PCI card correctly or try inserting the card into
an alternative PCI slot.
• If it appears with an error "!" or "?", remove or
uninstall the device by right clicking on the device.
Restart the computer, upon restart Windows will
redetect it. If error persists, try removing the card
and uninstalling the driver. Repeat the installation
process.
3