LG LSGL5833 Serie Manual Del Propietário página 73

us_main.book.book Page 73 Wednesday, June 16, 2021 3:46 PM
Problem
Oven shows error
code (F9, F19) but
cooktop burners
are working.
Flames too big on
converted cooktop
(NP LP)
~
Flame is too small
or too large
The gas pressure regulator valve is closed.
Lever's closed position
a
• Check that the regulator valve is in the open position.
• If the regulator valve is closed, rotate the lever to open the valve.
Lever's closed position
a
Lever's open position
c
The installer missed part of the conversion. (Check 3 parts: regulator, cooktop
valve, broil/bake valve.)
Regulator
a
Cooktop valve
b
Broil/Bake valve
c
• Check with installer first.
• Refer to installation manual.
1. Variable gas pressure
2. Installer did not check
Valve shaft
a
Center adjustment screw
b
• Check with installer first.
Possible Cause & Prevention
LIMITED WARRANTY 73