Bosch RA1171 Instrucciones De Funcionamiento Y Seguridad página 14

OWNER'S MANUAL FOR OPERATION INFORMATION.
DETERMINE THE MOUNTING METHOD TO
BE USED (see chart on page 15)
If your router model is listed in the chart on page
15, proceed to step 1 below. If it is NOT listed, you
must purchase a BOSCH RA1186 Router Adapter
Plate, available separately.
If your router model IS listed:
1. Determine the hole pattern that matches the
mounting hole pattern for your router.
2. Determine which fasteners you will need to attach the
router to the router adapter plate.
3. Determine which mount type (1 or 2) is used for your
router model.
MOUNTING PLATE GUIDE FOR COMPATIBLE ROUTERS (Fig. 10)
FIG. 10
Router Table Assembly
BEFORE USING THE ROUTER TABLE, REFER TO THE ROUTER
SELECTING THE ROUTER HOLE PATTERN
C
D
A
10-32 THREADED
HOLE FOR STARTER
PIN GUARD
B
D
C
OVER-TABLE
ADJUSTMENT HOLE
MOUNT TYPE 1
MOUNTING PLATE
ROUTER BASE
A
B
C
D
1/4-28 THREADED
HOLE FOR
STARTER PIN
B
D
A
TOP FRONT OF PLATE
14
MOUNT TYPE 2
MOUNTING PLATE
ROUTER BASE
C