Warranty Information - Oki Microline 390 Turbo Información Sobre Seguridad, Garantía, Y Regulaciones

Ocultar thumbs Ver también para Microline 390 Turbo:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

This product has an earthed plug as a safety feature and will only
connect to an earthed socket. Do not attempt to defeat the
earthing or there is a risk of fire or shock.
If using an extension cable or power strip ensure that the total
current rating (amperes) of all connected equipment is less than
the maximum rating of the extension cable, power strip or wall
outlet. If the product is already supplied with a fitted power strip
then no additional power strip or extension cable should be used to
connect to the mains wall outlet. Otherwise, fire or shock may
occur.
Ensure the power cable is routed so as not to be damaged or cause
a trip hazard. If the cable becomes frayed or damaged replace it
immediately to prevent any risk of shock.
Do not twist, constrict or knot the power cable as this can cause
overheating which may lead to fire or electric shock.
Ensure the power socket to which the product is connected is easily
accessible at all times and not obstructed.
Use only the power cable supplied. Using a power cable not
intended for this product may lead to fire or electric shock.
To avoid risk of fire and electric shock, do not use the power cable
supplied with this product for any other electrical equipment.
If you do not connect the power cord or any other cables only as
directed in the User's Guide, this may result in a fire.
It is recommended that the machine is switched off prior to opening
covers; otherwise there is a risk of electric shock.
When the product cover is open, do not touch the fuser unit or print
head as you may receive burns. Allow it to cool before touching.
If the product casing gets extremely hot or smoke, unusual smells
or abnormal noises are emitted from the product, there is a risk of
fire. Unplug the mains connector and contact your dealer.
If the product has been knocked over or damaged, there is a risk
of electric shock, fire and/or injury. Unplug the mains connector
and contact your dealer.
If any liquid (for example water) is allowed to enter the product,
there is a risk of fire. Unplug the mains connector and contact your
dealer.
Do not place containers containing liquid on the product as electric
shock, fire and/or injuries may occur.
If any foreign objects (for example clips) are allowed to enter the
product, there is a risk of electric shock, fire and/or injury. Unplug
the mains connector before removing the object.
Do not introduce foreign objects into the ventilation holes or
operate this product with any covers open or doors removed as
electric shock, fire and/or injuries may occur.
Do not use an extremely flammable spray near the product as the
product contains high temperature parts that may cause a fire.
Switch the product off before cleaning to prevent any risk of injury.
Clean using a damp cloth. Do not use liquid or aerosol cleaners.
Ensure loose clothing and hair is kept clear of moving parts when
the product is in operation to prevent possible risk of injury.
Do not carry out any operations on the product that are not
specified in the User's Guide. This may result in electric shock, fire
and/or injury.
Do not touch the battery if one is fitted to the product. There is a
risk of explosion if the battery is replaced by an incorrect type. The
product battery should not require replacement during the life of
the product.
Do not throw toner cartridges or image drum cartridges into a fire
as you may receive burns from a dust explosion.
After installing additional memory, hard disk drive, or any other
internally fitted option, any covers removed or doors opened must
be closed or replaced and secured to prevent risk of fire.
The acoustic noise of this product is less than 70 dB (A) as
measured in accordance with EN ISO 7779.
The operating condition range for your product is: 10 to 32°C and
20 to 80% RH. Operation of the product outside this range could
result in damage to the product.
If a scanner, finisher etc. is fitted, exercise care when moving these
items so as to avoid risk of entrapment or personal injury.
If the product is installed on a cabinet or high capacity feeder,
ensure wheel locks are applied once placed in final position for use,
to prevent risk of movement or injury.
English
Limited Warranty, US and Canada
U.S. and Canada only
Oki Data Americas, Inc. (Oki Data) warrants this Microline
390 Turbo, 390Turbo-n, 391Turbo, 391Turbo-n (hereinafter
"the Product") to be free from defect in material and
workmanship and will remedy any such defect according to
the terms of this Limited Warranty.
This Limited Warranty extends to the original purchaser
only. This Limited Warranty does not extend to consumable
items, including but not limited to ribbons, fuses, etc.
Oki Data will repair (or at its option, replace) at no charge,
any defective component(s) of the Product for a period of
one (1) year from date of purchase.
To make request or claim for service under this Limited
Warranty, contact your Oki Data Authorized service center
or Oki Data at 1-800-OKI-DATA (1-800-654-3282) or at
www.sharpusa.com. The original purchaser must return the
Product, shipping prepaid, in the original shipping container
or equivalent to Oki Data or an authorized Oki Data service
center and assume the risk of loss or damage in transit.
A written receipt for the product, showing the date of
purchase, dealer's name, and serial number of the Product,
must accompany any request or claim for work to be
performed under this Limited Warranty.
This Limited Warranty shall not apply if the product has
been damaged due to abuse, misuse, misapplication,
accident, or as a result of service or modification by any
other than an authorized Oki Data service center.
THERE ARE NO EXPRESS WARRANTIES OTHER
THAN THOSE ON THE FACE HEREOF AND
DESCRIBED ABOVE. NO WARRANTIES WHETHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SHALL EXTEND BEYOND
THE RESPECTIVE WARRANTY PERIOD DESCRIBED
ABOVE. Some states do not allow limitations on how long
an implied warranty lasts, so the above limitation may not
apply to you.
OKI DATA SHALL NOT BE RESPONSIBLE OR LIABLE
FOR ANY SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSS ARISING
FROM THE USE OF THIS PRODUCT. Some states do not
allow the exclusion or limitation of incidental or
consequential damages, so the above exclusion may not
apply to you.
Except for the warranty coverage referenced above,
NEITHER OKI DATA NOR ITS SUPPLIERS SHALL
HAVE ANY LIABILITY OR OBLIGATION TO
CUSTOMER OR ANY OTHER PERSON FOR ANY
CLAIM, LOSS, DAMAGE, OR EXPENSE CAUSED IN
WHOLE OR IN PART, DIRECTLY OR INDIRECTLY, BY
THE INADEQUACY OF ANY PRODUCTS FOR ANY
PURPOSE, BY ANY DEFICIENCY OR DEFECT IN ANY
PRODUCTS (WHETHER OR NOT COVERED BY ANY
WARRANTY), BY THE USE OR PERFORMANCE OF
ANY PRODUCTS OR BY ANY FAILURE OR DELAY IN
OKI DATA'S PERFORMANCE HEREUNDER, OR FOR
ANY SPECIAL, DIRECT, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGE, HOWEVER CAUSED
3 - English

Publicidad

Tabla de contenido
loading

Tabla de contenido