Dimming The Display Window Brightness (Dimmer); Setting The Power Economizing Mode - Aiwa XR-DV3M Manual De Instrucciones

Sistema estereo dvd
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

DEMO/ECO
CURSOR
ENTER
DIMMING THE DISPLAY
WINDOW BRIGHTNESS
(DIMMER)
The display window brightness can be adjusted to the following
four levels: "DIM-OFF", "DIMMER 1", "DIMMER 2", and "DIMMER
3".
"DIM-OFF" is the brightest level.
When "DIMMER 3" is selected the display is darkest, and the
illumination lights around the function buttons and the VOLUME
control also go off.
1 While the power is turned on, press DEMO/ECO
twice.
"DIM MODE" is displayed.
2 Within 4 seconds, press ENTER.
The currently selected brightness is displayed.
Example: When "DIM-OFF" is selected
3 Within 4 seconds, move CURSOR i or k
repeatedly to select the desired brightness.
Alternatively, press i or k on the remote control.
4 Within 4 seconds, press ENTER.
10
ENGLISH
SETTING POWER
ECONOMIZING MODE
Setting the unit to power economizing mode reduces power
ENTER
consumption.
i/k
When the power economizing mode is set to ON or AUTO
• When the power shuts off, all indications of the display window
including the clock are turned off.
• The display window brightens only when the unit is being
operated. When the unit has not been operated for 10 seconds,
the brightness switches to the level chosen by the "DIM MODE"
setting. (If the brightness is set to "DIM-OFF", the brightness
does not change.
When the power economizing mode is set to AUTO
In addition to the above:
• If the disc is stopped and there is no audio input from any
connected equipment for 10 minutes, the power shuts off. (When
listening to the radio, however, the power does not shut off
automatically.)
1 While the power is turned on, press DEMO/ECO.
"ECO MODE" is displayed.
2 Within 4 seconds, press ENTER.
The current power economizing mode status is displayed.
If the power economizing mode is OFF : ECO OFF
If the power economizing mode is ON : ECO ON
If the power economizing mode is AUTO : ECO AUTO
3 Within 4 seconds, move CURSOR i or k
repeatedly to select the desired brightness.
Alternatively, press i or k on the remote control.
Example: When "AUTO" is selected
4 Within 4 seconds, press ENTER.
Standby power consumption
When the power economizing mode is OFF : 20 W
When the power economizing mode is ON or AUTO : 2.0 W

Publicidad

Tabla de contenido
loading

Tabla de contenido