Dyna-Glo DGF510SBP Manual Del Usario página 16

ASSEMBLY INSTRUCTIONS
19. Place grease pan (E) and grease cup (F)
in place.
20. Place gas cylinder (sold separately) into the
nesting hole located in the Bottom shelf (W).
Rotate the gas cylinder until the hose/regulator
coupling aligns with the threaded valve of the
cylinder. Hand-tighten the hose/regulator
coupling to the threaded valve of the LP gas
cylinder.
Tighten the tank screw clockwise
bottom shelf (W) until the cylinder is secured in
place inside the nesting hole of the Bottom
shelf (W).
Front View
Rear View
19
20
in the
16
E
F
W
Tank
LP
Gas
Screw
Cylinder