Downloading All Reports; Downloading By Commission Number, Date Or Report Range; Understanding The Report Download Process; Deleting Data From Memory - HURNER HST 300 Print 315 2.0 Manual De Instrucciones

H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
The Service Report option is not important for normal
operation. In the scope of computer-assisted unit service,
this report lists the events related to the maintenance of
the welding unit.

8.2 Downloading All Reports

After the file type was selected, the next screen offers a
"Print All Reports" option. Selecting it will download all
welding reports currently in system memory in the previ-
ously selected file format.
8.3 Downloading by Commission Number, Date or
Report Range
After the file type was selected, the next screen offers a
"By Commission Number," a "By Date Range," and a "By
Report Range" options. Depending on the selection, the
ñ and ò arrow keys can be used to select from the com-
missions currently in system memory the desired one, of
which the reports should be downloaded, or the ï, ð, ñ,
ò cursor keys can be used to enter a start date and an end
date, or the first and the last report, that define a range
of dates or a range of reports of which the reports should
be downloaded. When you press the START/SET key, you
cause the selected reports to be transferred to the stor-
age media.

8.4 Understanding the Report Download Process

The download starts automatically after a selection was
made among the options. Wait for all the selected reports
to transfer and the "Download completed" message to
appear on the screen.
If a problem occurs while the download is in progress, a
"Not ready" message shows. After the problem condition
is cleared, the download resumes automatically.
If the welding unit recognizes a problem that
cannot be cleared while the data transfer is in
Info
progress, it does not resume the process and dis-
plays a "Download cancelled" error message. To
acknowledge this error, press the START/SET key.

8.5 Deleting Data from Memory

The report data in memory can be deleted only after all
welding reports were transferred, which is indicated by the
"Download completed" message. When the storage media
is unplugged, a "Delete Memory" message appears. If the
Version September 2018 HÜRNER HST 300 Print 315 2.0 User's Manual
15
EN