IKEA MOTSVARIG Manual De Instrucciones página 21

Ocultar thumbs Ver también para MOTSVARIG:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
Setting the Clock
When the appliance is first plugged in or when the
power supply to the appliance has been interrupted,
the display will flash 12:00. It is recommended to
always set the clock for the correct time of day be-
fore using the appliance.
To set the clock:
1. Press Set Clock once (do not hold clock key
down).
2. Within 5 seconds, press and hold
until the correct time of day appears in the dis-
play
NOTE
The clock cannot be changed when the oven is set
for cooking or self clean is active
Temperature display
(fahrenheit/Celsius)
The electronic oven control is set to operate in Fahr-
enheit (°F) at the factory. The oven may be pro-
grammed for any temperature from 170°F to 550°F
(77°C to 288°C).
To change the temperature to Celsius (°C) or
from °C to °f:
1. Press Broil. — — appears in the display.
2. Press and hold
display.
3. Press and hold Broil until °F or °C appears in the
display.
4. Press or to change °F to °C or °C to °F. To ac-
cept the change, wait 6 seconds.
or
until HI appears in the
Changing between continuous bake or
12-hour energy saving feature
The oven control has a built-in 12-hour energy sav-
ing feature that will shut off the oven if the oven is
left on for more than 12 hours. The oven control can
be programmed to override this feature for continu-
ous baking.
To change the continuous bake setting:
1. Press and hold Time On-Off for until a tone
sounds. — — hr will appear in the display for
continuous cooking. Release Timer On-Off key
and the current time of day will return to the
display.
2. To cancel the continuous bake setting, press
Timer On-Off and hold until tone sounds. 12 hr
will appear in display indicating the control has
returned to the 12-hour energy saving feature.
IMpORTANT
Changing to continuous bake or 12 hour mode
does not change how the cooktop controls
operate
Setting a silent control panel
When selecting a function, an audible tone is heard
each time a key is pressed. If desired, the control
can be programmed for silent operation.
To set the controls for silent operation:
1. Press and hold Start Time until the control
beeps once and then release the key.
2. The controls are now set for silent operation.
To return to non-silent operation:
1. Press and hold Start Time again until the con-
trol beeps once and release the key.
2. The control is now set for audible operation.
OVEN CONTROLS
21

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido