Assembly Marina Combi - Extremis MARINA COMBO Instrucciones De Montaje

ASSEMBLY MARINA COMBO
WHAT YOU NEED
min. 2 people
no. 10 - 17 spanner
no. 3 - 4 hex key
+/- 60
(depending on the length
of the table)
2. Now screw the adjustable feet into the legs. Repeat step
1 through 2 for each table leg assembly and put them
aside.
2. Slide the bench supports onto the table legs.
1
- 120 min.
1. Insert the table legs into the tabletop connection, aligning the 3 holes, and
use 12 M6 x 16 hexagon socket bolts and 12 lock nuts to fasten them. First
push all the bolt shafts through the holes and make sure that the bolts are
on the outside. Then thread the nuts onto the shafts of the bolts and tighten
them firmly.
look at p. 4 which type of
legs you have
2
1. Insert the table legs into the tabletop connection,
aligning the 3 holes, and use 12 M6 x 16 hexagon
socket bolts and 12 lock nuts to fasten them. First push
all the bolt shafts through the holes and make sure that
the bolts are on the outside. Then thread the nuts onto
the shafts of the bolts and tighten them firmly.
3. Slide the bench connections onto the table leg and the
bench support. First push 12 M6 x 16 hexagon sockets
bolt shafts through the pre-drilled holes. Make sure
that the bolts are on the outside. Only then thread the
12 lock nuts onto the shafts of the bolts and tighten
them firmly!
english 5