Care Of Your Fan - Progress Lighting AirPro P250010 Manual De Instalación

Installing the Remote Control
Holder
Attach the remote control holder with the remote
control holder mounting screw. (Figure 21)
Screw
Figure 21

11. Care of Your Fan

Here are some suggestions to help you maintain
your fan
1. Because of the fan's natural movement, some
connections may become loose.
support connections, brackets, and blade
attachments twice a year.
secure.
(It is not necessary to remove fan from
ceiling.)
2. Clean your fan periodically to help maintain its
new appearance over the years. Use only a soft
brush or lint-free cloth to avoid scratching the
Remote
finish. The plating is sealed with a lacquer to
Control
minimize discoloration or tarnishing. Do not use
Holder
water when cleaning. This could damage the
motor, or the wood, or possibly cause an electrical
shock.
3. You can apply a light coat of furniture polish
to the wood blades for additional protection and
enhanced beauty. Cover small scratches with a
light application of shoe polish.
Check the
4.
There is no need to oil your fan.
Make sure they are has permanently lubricated bearings.
MAKE SURE THE POWER IS OFF AT
THE ELECTRICAL PANEL BOX BEFORE
YOU ATTEMPT ANY REPAIRS. REFER
IMPORTANT
TO THE SECTION "MAKING
ELECTRICAL CONNECTIONS".
The motor