Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5L Pressurized Kegs (Heineken™)
1.
Follow any required instructions marked on the keg to eliminate excess gas, and to
ensure the keg has rested long enough to avoid foam coming out of the Tap Faucet.
2.
Carefully place the Pressurized Keg into the Cooling Cavity.
3.
Use a flat head screwdriver to remove the plastic plug from the top of the keg.
4.
Connect the Pressurized Keg Adapter to the Tap Beer Line.
5.
Insert the Pressurized Keg Adapter into the top of the Pressurized Keg.
Cooling Cavity
Pressurized Keg Adapter
Tap Beer Line
Installing the CO2 Cartridge
1.
Tilt the CO2 Holder out from the Top Cover
and unscrew the CO2 Sheath.
2.
Screw in the CO2 cartridge into the CO2 holder and then
screw the CO2 Sheath back on, covering the CO2 cartridge.
NOTE: When the CO2 cartridge has been pierced, you should
hear a short burst of CO2 escape from the cartridge.
3.
Tilt the CO2 Cartridge Holder back into the Top Cover.
10
Publicidad
Capítulos
Tabla de contenido
