Nostalgia Products HomeCraft CBD5BS Instrucciones página 6

Sistema de barril de cerveza tirada artesanal
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Instructions for the Electrical Cord and Plug
1.
This appliance has a polarized plug (one blade is wider than the other). To reduce the
risk of electrical shock, this plug is intended to fit into a polarized outlet only one way.
If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt to modify the plug in any way.
2.
A short power supply cord is provided to reduce the risk resulting
from becoming entangled or tripping over a long cord.
3.
If a long detachable power-supply cord or extension cord is used:
Extension cords can be used if care is exercised in their use.
The marked electrical rating of the cord or extension cord should
be at least as great as the electrical rating of the appliance.
When using a longer cord or extension cord, make sure that
the cord does not drape over a countertop or tabletop where
it can be pulled on or tripped over unintentionally.
4.
The manufacturer does not recommend using this machine in countries that do not
support 120V AC even if a voltage adapter, transformer, or converter is in use.
CO 2 (Carbon Dioxide) Gas
1.
DO NOT remove the CO2 cartridge from unit until CO2 cartridge is completely empty.
2.
Always keep CO 2 cartridges away from heat. Store extra
cartridges in a cool, dry place (preferably 70°F/20°C).
3.
DO NOT use the CO2 cartridge if the room temperature is over 120°F
(49°C). Failure to do so can result in explosion or injury. Escaping CO2
gas can cause frostbite if allowed to come in contact with skin.
4.
CO 2 gas can be dangerous! CO 2 cartridges contain high-pressure compressed
gas, which can be hazardous if not handled properly. Make sure you read and
understand all the procedures for the CO 2 cartridge before installation.
5.
Never connect the CO 2 cartridge directly to the beer keg.
6.
Always follow the correct procedures when changing the CO 2 cartridge.
7.
ALWAYS ventilate and leave the area immediately if CO 2 leakage has occurred.
8.
Never drop or throw a CO 2 cartridge.
9.
Never attempt to refill a CO 2 cartridge.
SAVE THESE INSTRUCTIONS!
4

Publicidad

Tabla de contenido
loading

Tabla de contenido