Picture Control
Using Automatic Picture Settings
Your TV has Three automatic picture settings ("Dynamic", "Standard" and "Movie") that are preset at the factory.
You can activate either Dynamic, Standard, Movie by making a selection from the menu.
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2. Press the ENTER button to select "Mode".
Press the ▲ or ▼ button to select the "Dynamic", "Standard", "Movie" picture
setting. Press the ENTER button.
Choose Dynamic to increase the clarity and sharpness of the picture.
Choose Standard for the standard factory settings.
Choose Movie for a natural Image without picture enhancements.
3. P ress the ▲ or ▼ button to select "Contrast", "Brightness", "Sharpness",
"Color", "Tint(G/R)" or "Backlight", then press the ENTER button.
4. Press the ◄ or ► button to decrease or increase the value of a particular item.
For example, if you select "Contrast", pressing the ► button increases it.
Press the ENTER button.
Press the EXIT button to exit.
When you make changes to "Contrast", "Brightness", "Sharpness",
"Color", "Tint(G/R)" or "Backlight", the OSD will be adjusted accordingly.
When in PC mode, Tint, Sharpness and Color are not available.
Each adjusted setting will be stored separately according to its input mode.
Press the P.MODE button on the remote control repeatedly to select the desired
picture mode.
English - 2
TV
Picture
Mode
: Dynamic
Contrast
Brightness
Sharpness
Color
Tint
G 50
Backlight
▼More
Move
Enter
TV
Picture
Mode
: Dynamic
Dynamic
Standard
Contrast
Movie
Brightness
Sharpness
Color
Tint
G 50
Backlight
▼More
Move
Enter
TV
Picture
Mode
: Dynamic
Contrast
Brightness
Sharpness
Color
Tint
G 50
Backlight
▼More
Move
Enter
▲
Contrast
▼
Move
Adjust
►
100
45
75
55
R 50
10
Return
100
45
75
55
R 50
10
Return
►
100
45
75
55
R 50
10
Return
100
Return