Sportplus SP-HT-9600-iE Manual De Instrucciones página 53

7. USING THE COMPUTER
ERROR MESSAGES
Display
E1 (ERROR 1)
E2 (ERROR 2)
E3 (ERROR 3)
Cause
The computer does not receive any position signal from the
actuator (67), or the movement of the motor has been blocked.
• Check the wiring of the product for any damage or jamming.
• Check the movement range of the brake for any blockage.
• Please contact our customer service.
The system cannot recall the program data from the memory.
• The computer must be replaced.
• Please contact our customer service.
The actuator does not move to the designated position.
• Replace the actuator.
• Please contact our customer service.
53