Recycling Information; Operator Safety - Briggs & Stratton 210000 Manual De Operario

Ocultar thumbs Ver también para 210000:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Copyright © Briggs & Stratton Corporation, Milwaukee, WI, USA. All rights reserved.
This manual contains safety information to make you aware of the hazards and risks
associated with engines and how to avoid them. It also contains instructions for the
proper use and care of the engine. Because Briggs & Stratton Corporation does not
necessarily know what equipment this engine will power, it is important that you read
and understand these instructions and the instructions for the equipment. Save these
original instructions for future reference. 
Note: The figures and illustrations in this manual are provided for reference only and
may differ from your specific model. Contact your dealer if you have questions. 
For replacement parts or technical assistance, record below the engine model, type,
and code numbers along with the date of purchase. These numbers are located on your
engine (see the  Features and Controls  section). 
 Date of Purchase 
 Engine Model - Type - Trim 
 Engine Serial Number 

Recycling Information

All packaging, used oil, and batteries should be recycled
according to applicable government regulations.

Operator Safety

Safety Alert Symbol and Signal Words
The safety alert symbol (
) is used to identify safety information about hazards that
can result in personal injury. A signal word (DANGER, WARNING, or CAUTION) is used
with the alert symbol to indicate the likelihood and the potential severity of injury. In
addition, a hazard symbol may be used to represent the type of hazard. 
 
  DANGER indicates a hazard which, if not avoided, will result in death or
serious injury. 
 
  WARNING indicates a hazard which, if not avoided, could result in death or
serious injury. 
 
  CAUTION indicates a hazard which, if not avoided, could result in minor or
moderate injury. 
 NOTICE  indicates a situation that could result in damage to the product. 
Hazard Symbols and Meanings
Symbol 
Meaning 
 
Safety information about
hazards that can result in
personal injury. 
 
 
Fire hazard 
 
 
Shock hazard 
 
 
Hot surface hazard 
 
4
 
Symbol 
Meaning 
 
Read and understand the
Operator's Manual before
operating or servicing the
unit. 
 
 
Explosion hazard 
 
 
Toxic fume hazard 
 
 
Noise hazard - Ear protection
recommended for extended
use. 
 
Symbol 
Meaning 
 
Thrown object hazard -
Wear eye protection. 
 
 
Frostbite hazard 
 
 
Amputation hazard -
moving parts 
 
 
Thermal heat hazard 
 
Safety Messages
WARNING
This product can expose you to chemicals including gasoline engine exhaust, which
is known to the State of California to cause cancer, and carbon monoxide, which is
known to the State of California to cause birth defects or other reproductive harm. For
more information go to www.P65Warnings.ca.gov. 
WARNING
Briggs & Stratton® Engines are not designed for and are not to be used to power:
fun-karts; go-karts; children's, recreational, or sport all-terrain vehicles (ATVs);
motorbikes; hovercraft; aircraft products; or vehicles used in competitive events not
sanctioned by Briggs & Stratton. For information about competitive racing products,
see www.briggsracing.com. For use with utility and side-by-side ATVs, please contact
Briggs & Stratton Power Application Center, 1-866-927-3349. Improper engine
application may result in serious injury or death.
WARNING
Fuel and its vapors are extremely flammable and explosive.
Fire or explosion can cause severe burns or death.
When Adding Fuel
• Turn engine off and let engine cool at least 2 minutes before removing the fuel
cap.
• Fill fuel tank outdoors or in well-ventilated area.
• Do not overfill fuel tank. To allow for expansion of the fuel, do not fill above the
bottom of the fuel tank neck.
• Keep fuel away from sparks, open flames, pilot lights, heat, and other ignition
sources.
• Check fuel lines, tank, cap, and fittings frequently for cracks or leaks. Replace if
necessary.
• If fuel spills, wait until it evaporates before starting engine.
When Starting Engine
• Ensure that spark plug, muffler, fuel cap and air cleaner (if equipped) are in place
and secured.
• Do not crank engine with spark plug removed.
• If engine floods, set choke (if equipped) to OPEN / RUN position, move throttle (if
equipped) to FAST position and crank until engine starts.
When Operating Equipment
• Do not tip engine or equipment at angle which causes fuel to spill.
• Do not choke the carburetor to stop engine.
Symbol 
Meaning 
 
Explosion hazard 
 
 
Kickback hazard 
 
 
Chemical Hazard 
 
 
Corrosive 
 
BRIGGSandSTRATTON.com

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

310000

Tabla de contenido