Briggs & Stratton 1696506-01 Manual Del Operador página 14

7
A
Discharge Chute and Deflector
Chute Rotation - Switch Mount (if equipped)
1. Press the switch to rotate the chute (A, Figure 6).
2. Release the switch to lock the chute in the desired position.
Chute Rotation - Handle Mount (if equipped)
1. Squeeze and hold the button on the chute control handle (A,
Figure 7).
2. Push the handle forward or pull it rearward to rotate the chute.
3. Release the button to lock the chute in the desired position.
NOTICE: Do not use excessive force when trying to operate the
control.
Deflector Adjustment
1. Squeeze and hold the button on the deflector control handle
(B, Figure 6, Figure 7).
2. Move the control handle up or down to adjust the snow
discharge height and distance.
3. Release the button to lock the deflector in the desired
position.
14
Clearing a Clogged Discharge Chute
C
B
1. STOP THE ENGINE!
DANGER
Discharge chute contains rotating impeller
to throw snow. Never clear or unclog the
discharge chute with your hands. Fingers can
quickly become caught in the impeller. Always
use a clean-out tool.
Failure to observe these safety instructions
will result in traumatic amputation or severe
laceration.
2. Ensure that the impeller blades have stopped rotating.
3. Use a clean-out tool to remove snow from the discharge
chute. Never clear a clogged discharge chute with your
hands!