Connecting Strap - TEMPUR-PEDIC ERGO EXTEND Manual Del Propietário

connecting strap (optional)
OVERVIEW
If a split setup is being installed, plastic connecting straps are provided (one per
base) to secure the bases together. Use both straps to secure the head and foot
portions together.
STEP 1
With the bases in their desired location, slightly
loosen both legs to allow the strap to fit on the leg
bolt, between the leg washer and frame.
14
Connecting straps are secured to the base frame upon delivery.
STEP 2
Slide side (a) of the connecting strap onto leg bolt.
Swing the strap and connect side (b) to the leg bolt.
Secure the strap by shifting to the left.
STEP 3
Re-tighten legs. Do not over tighten. Use the
remaining strap on other end of the base.
a
b