Understanding Internal Alarms; Using Naída Ci Headpieces; The Universal Headpiece; Replacing The Rf Cables - Advanced Bionics Naída CI Q70 Guía De Usuario

If the user would like to know the battery status of the Zn-Air Battery Pak they are currently
using and have an AB myPilot paired to their device, they can conduct a Battery Check readout
of the Naída CI Q70. To ensure an accurate reading of the Zn-Air Battery Pak, wait at least 15
minutes after it has been attached to the Naída CI Q70 before performing a Battery Check
readout.
Battery Check
Please see the
conduct a battery status check using AB myPilot.

Understanding Internal Alarms

Internal alarms are a programmable feature that can be used independently or in conjunction
with the Naída CI LEDs to provide important information about Naída CI status and battery life.
Naída CI Internal Alarms
Behavior
Beeps upon
program change
Short Beep upon
increase/decrease
in volume
Long Beep (once
every 15 minutes)
Using the Naída CI Headpieces:
The Naída CI Q70 works with the Universal Headpiece (UHP)

The Universal Headpiece

The UHP is designed for use with the Naída CI Q70 processor during all daily activities, with the
exception of swimming and bathing.
Replacing RF Cables
RF cables are available in a variety of colors and lengths to suit the recipient's personal wearing
preferences. Before you can use the Naída CI Q70 sound processor, you must use the cable
28
Naída CI Q70 Sound Processor User Guide
AB myPilot User Guide
section of the
Programmable
Yes
Yes
Yes
for instructions on how to
Indication
1 beep indicates program one
•
2 beeps indicate program two
•
3 beeps indicate program three
•
4 beeps indicate program four
•
5 beeps indicate program five
•
Beeps once per press of the volume control
either up or down (a double beep will be heard
when the following settings are reached: top of
the volume range; baseline volume setting; and
bottom of the volume range)
Low battery