The Zn-Air Battery Pak; Inserting Zn-Air Batteries - Advanced Bionics Naída CI Q70 Guía De Usuario

Procesador de sonido
Ocultar thumbs Ver también para Naída CI Q70:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 135

The Zn-Air Battery Pak

The Naída CI Q70 uses size 675 Power Implant disposable batteries (675P). Regular size
675 hearing instrument batteries will not be powerful enough for a cochlear implant.

Inserting Zn-Air Batteries

Holding the Zn-Air Battery Pak in one hand,
gently but firmly push down on the lever on
the back of the battery cartridge. This will
cause the drawer to pop out of the bottom
of the cartridge.
Remove the Zn-Air batteries from their package, making sure to remove the tape from the flat
3
positive (+) side of the cell. Removing the tape allows oxygen to flow in and activate the battery,
so be sure to install it immediately after peeling off the tape.
Place two Zn-Air batteries, positive (+)
(flat) side up, in the two openings in the
battery drawer.
Note: If the cells are inserted incorrectly, the battery drawer will not close.
46
Naída CI Q70 Sound Processor User Guide
1
4
2
Pull the battery drawer out of the
cartridge with the other hand.
5
Once the batteries are flush with
the top of the battery drawer, gently
slide the battery drawer back into the
battery cartridge.

Publicidad

Tabla de contenido
loading

Tabla de contenido