Festool UG-KAPEX KS60 Instrucciones De Montaje página 11


Weigh down the tubular frame by placing your
foot on it and use one hand on the side of the
folding/fixed stand to lift the adapter plate [18].
The folding/fixed stand disengages from the
catch.

Fold in the folding/fixed stand.
The folding/fixed stand engages by means of a
locking latch.

Slowly swivel the adapter plate into the vertical
position.
The compound mitre saw is ready for transporta-
tion [19] .
 If you bought both of the trimming attachments
in a set, you can fix these onto the base frame
[21] with the transport caps and strap [20].
 The base frame can be transported vertically
[21] or horizontally [22].
10 Accessories
The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under "www.festool.com".
11 Environment
Do not dispose of the device as domestic waste!
Dispose of machines, accessories and packaging at
an environmentally responsible recycling centre.
Observe the respective national regulations.
Information on REACh: www.festool.com/reach
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at: www.festool.com/service
EKAT
Only use original Festool spare parts!
4
Order No. at: www.festool.com/service
5
3
2
1
UG-KAPEX KS 60
GB
11