Chauvin Arnoux F603 Guía De Inicio página 12

English
1.1 THE SWITCH
The switch has six positions. To access the
switch to the desired function. Each setting is confirmed by an audible signal. The functions
are described in the table below.
6
5
4
3
2
1
1.2 THE KEYS OF THE KEYPAD
1 2
4 5
, , ,
Item
1 OFF mode – Switches the clamp
multimeter off
2 AC, DC voltage measurement (V)
3 Continuity test
Resistance measurement Ω
Diode test
4 AC, DC current measurement (A)
5 Temperature measurement (°C/°F)
6 Adapter function
3
Item
1 Storage of values, disabling of display
Zero correction A
Compensation of the resistance of the
leads in the continuity and ohmmeter
function
2 Selection of the type of measurement
(AC, DC)
3 Activation or de-activation of the
backlighting
6
of the display unit
4 Activation or de-activation of the
MAX/MIN mode
Activation or de-activation of the
INRUSH mode in A
5 Frequency measurements (Hz)
6 Activation of ∆REL mode – Display of
differential and relative values
Clamp Multimeter F603
, , functions, set the
Function
Function
DC