Axxess AXGMMT-01 Instrucciones De Instalación página 6

L.E.D. feedback
The (18) Red L.E.D. flashes represent which brand radio the AXSWC is connected to. Each flash represents a different radio Manufacturer. For example, if you are installing a JVC radio, the AXSWC will
flash Red (5) times, and then stop. Following is a legend that dictates which radio Manufacturer corresponds to which flash.
L.E.D. feedback legend
F lash Count Radio
1 Eclipse (type 1) †
2 Kenwood ‡
3 Clarion (type 1) †
4 Sony / Dual
5 JVC
6 Pioneer / Jensen
7 Alpine *
8 Visteon
9 Valor
6
PROGRAMMING
F lash Count Radio
10 Clarion (type 2) †
11 Metra OE
12 Eclipse (type 2) †
13 LG
14 Parrot **
15 XITE
16 Philips
17 TBD
18 JBL
(CONT)
* If the AXSWC flashes Red (7) times, and you do not have an Alpine radio connected to it, that
means the AXSWC doesn't detect a radio connected it. Verify that the 3.5mm jack is connected
to the correct steering wheel jack/wire in the radio.
** The AXSWCH-PAR is required (sold separately). Also, the Parrot radio must be updated to rev.
2.1.4 or higher through www.aparrot.com.
† If you have a Clarion radio and the steering wheel controls do not work, change the radio
type to the other Clarion radio type; same for Eclipse. Refer to the AXSWC document online for
changing the radio type.
‡ If you have a Kenwood radio and the L.E.D. feedback comes back as showing as a JVC radio, change
the radio type to a Kenwood. Refer to the AXSWC document online for changing the radio type.