Connection Examples; Connecting 15K Rgb/Component Equipment - Sony VPL-FE100U Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Connection Examples

For details on how to connect a computer, VCR or external
active speakers, see page 17 (GB). Also refer to the
instruction manual of the equipment to be connected.
When making connections, be sure to:
• turn off all equipment before making any
connections.
• use the proper cables for each connection.
• insert the plugs of the cables properly; plugs that are
not fully inserted may generate noise. When pulling
out a cable, be sure to pull it out from the plug, not
the cable itself.

Connecting 15k RGB/Component Equipment

15k RGB/component
equipment
Signal flow
:
28
(GB)
to RGB/component output
Monitor cable
(not supplied)
Rear
INPUT C
INPUT B
INPUT A
VIDEO
AUDIO OUT
REMOTE
CONTROL S
Note
Switch the input signal with the INPUT-A item in the SIGNAL SELECT
menu.
For details, see page 27 (GB).
Connecting a BNC connector
2 Turn to the right.
1 Align the pins with the pin holes
and push in the plug into the
socket.
+
TRIG
DEVICE INDEX
0
to AC IN
to a wall outlet
AC power cord
(supplied)

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Vpl-fe100eVpl-fe100m

Tabla de contenido