Display Icons - Levenhuk Discovery Artisan 512 Manual Del Usuario

Discovery Artisan 512
Digital Microscope
EN
Microscope parts
MicroSD slot
AV out
HDMI out
Focus wheel
Polarizing wheel
Battery status indicator
Lower illumination
Height adjustment knobs
Capture
5" color LCD display
Brightness adjustment wheel
(upper illumination)
The kit includes: microscope, USB cable, AV cable, power adapter, software CD,
calibrating scale, user manual, and lifetime warranty.
Magnification adjustment wheel
Brightness adjustment wheel
(lower illumination)
DC: charge battery
USB: output to PC
Power on/off
Setup
Up
OK (Confirm)
Down
Photo/Video/Playback
Never, under any circumstances, look directly at the Sun, another bright
source of light or at a laser through this device, as this may cause
PERMANENT RETINAL DAMAGE and may lead to BLINDNESS.
Microscope assembly
The battery has to be fully charged before turning the microscope on for the first
time. Plug the power cable into the power cable socket on the microscope body (14)
and connect it to a power source. The battery status indicator (6) will turn red. Once
the battery is fully charged, the indicator will go out. You can now disconnect the
microscope from the power source and turn it on. The fully-charged battery allows
you to use the microscope for three hours. The illumination will grow dim and the
image quality will decrease to inform you that the battery is low. Charge the battery, as
described above.
A microSD card (purchased separately) is required to save captured images and
recorded videos. Turn the microscope off and insert the microSD card into the
corresponding slot on the microscope body until it locks in place with a click. Do not
apply excessive force when inserting the microSD card. Try rotating the card, if it does
not lock in place with ease. Format the card before using it. To turn the microscope on
press the power button (15). To turn the microscope off press the power button (15)
again (refer to Power saving for more information).

Display icons

Capture an
image
Playback mode
Current image
resolution
Battery status
indicator
Note: Interface icons will be hidden if no key has been pressed and held for 10 seconds.
Capturing an image
Turn the microscope on and place a specimen on the stage. The height of the
objective lens can be regulated with height adjustment knobs (8). Adjust the
illumination brightness, so that the specimen is evenly lit. You can use upper or
lower illumination. Change magnification and focus your view, if necessary. Press
the capture button (9).
Start and stop video
recording
Total number of images that
may be captured (based on the
current resolution)
MicroSD status icon
3