Control Panel - Caso VC350 Manual De Instrucciones

 Cutter: After pressing the Cover Unlock buttons, the Cutter will swing down into place for
cutting. Push it back into place until a click is heard to re-lock.
 Removable vacuum chamber. The open end of the bag must be placed inside the
chamber. This feature makes sure that air cannot escape from the bag and that excess
liquid is removed. Easy to remove and clean.

16.2 Control Panel

Indicator lamps
A Indicator lamp Seal (Schweißen)
Indicates the sealing process of the bag without vacuum
B Indicator lamp Vacuum & Seal (Vakuum & Schweißen)
Indicates the Vacuum/sealing process
C Indicator lamp Adjustable Vacuum (Vakuumstärke)
Indicates the vacuum process
D Indicator lamp Vacuum Canister (Vakuum Behälter)
Indicates the vacuum process for the canister
E Indicator lamps Selectable welding time (trocken & feucht)
Indicates the welding time chosen either for dry (trocken) or moist (feucht) vacuum food.
Buttons
Stop button
You can stop the vacuum and sealing process at any time
Button Sealing function (Schweißen)
Seals a bag without first vacuuming
Button Vacuum & Seal (Vakuum & Schweißen)
Air is drawn off from inside the bag (vacuuming), immediately after this process the bag is
sealed
Button Adjustable Vacuum (Vakuumstärke)
As long as you press the button, air is drawn off from inside the bag. When you release the
button, this process will stop. Afterwards you must seal the bag via the seal function.
Button Canister Vacuum (Vakuum Behälter)
Via the vacuum hose, air is drawn off from inside the vacuum canister
40