To Select The Source - Samsung LN S4692D Manual De Instrucciones

To Select the Source
Use to select TV or other exlemal input sources conneded to the TV.
Use to select the input source of your choice.
1• Press the MENU button to display the menu.
Press the ENTER_ button to select "Input".
2, Press the ENTER_ button to select "Source List".
Press the A or v buttons to select signal source, then press the ENTER_ button.
:_ When you connect equipment to the LCD, you can choose between the following sets of
jacks: TV, AVt, AV2, S-Video1, S-Video2, Component, PC, HDMI1, or HDMI2 on the
TV's rear panel.
HDMI1 or HDMI2 input can only be selected when the extemal device is turned on and
connected via HDMI,
:_ AV2/S-Video2 is placed on the side of the TV.
:_ You can choose only those external devices that are connected to the TV.
Press the SOURCE button on the remote control to view an external signal source.
To Edit the Input Source Name
Name the device connecled to the input jacks to make your input source selection easier.
1, Press the MENU button to display the menu.
Press the ENTER_ button to select "Input".
Press the A or v buttons to select "Edit Name", then press the ENTER_ button.
2, Press the _ or _ buttons to select "AVl", "AV2", "S-Video1", "S-Video2",
"Component", "PC", "HDMI 1" or "HDMI2" input jack, then press the
ENTER_ button.
3,
Press the -- or - buttons to select "VCR", "DVD", "D-VHS", "Cable STB", "HD
STB", "Satellite STB", "PVR STB", "AV Receiver", "DVD Receiver", "GAME",
"Camcorder", "DVD Combo", "PC", "VOD STB", or "TV" input source, then press
the ENTER_ button.
Press the EXIT button to exit.
English-22