Disc Operations; Playing A Disc - JVC KW-AV70BT Manual De Instrucciones

Disc operations

Playing a disc

• If a disc does not have any disc menu, all tracks on it will be played repeatedly until you change the source or eject
the disc.
Inserting a disc
1
Open the monitor panel.
On the source control screen:
2
The source changes to "DISC" and playback starts.
• The DISC IN ( ) indicator lights up while a
disc is inserted.
• If " " appears on the screen, the unit cannot
accept the operation you have tried to do.
– In some cases, without showing " ,"
operations will not be accepted.
• When playing back a multi-channel encoded
disc, the multi-channel signals are downmixed
to stereo.
1
2
• You can eject a disc when playing another AV source.
• If the ejected disc is not removed within 15 seconds,
• If the disc cannot be ejected, ☞ page 3 .
Label side
When removing a disc, pull it horizontally.
On the source control screen, press
MENU at the same time.
To cancel the prohibition, repeat the same procedure
to select <Eject OK?>.
18
To eject a disc
On the source control screen:
Press [ Eject].
the disc is automatically inserted again into the
loading slot to protect it from dust.
To prohibit disc ejection
and /