Using Other External Components; Av-In - JVC KW-AV70BT Manual De Instrucciones

Using other external components

To select the method to display the source control screen, ☞ page 11.
• The operation buttons disappear when no operation is done for about 10 seconds.
• To change settings for video playback, ☞ page 43.
AV-IN name ( ☞ below)
Adjusts the volume.
[ ] [–] [+]
[Mode] Changes the AV-IN name.
• Press [2] or [3] to select an AV-IN name.
[AV MENU] Displays <AV Menu> screen.

AV-IN

You can connect an external component to the LINE IN/
VIDEO IN jacks. (☞ Installation/Connection Manual)
Preparation:
Select <AV-IN> for <AV Input> setting. (☞ page 47)
• <AV Input> setting can be changed only when
<Input> setting in <Navigation Input> is set to
<RGB> or <Off>.
1
Select "AV-IN" as the source.
2
Turn on the connected component and
start playing the source.
35
(☞ page 12)