Descargar Imprimir esta página

DeWalt DCD780 Manual De Instrucciones página 16

Ocultar thumbs Ver también para DCD780:

Publicidad

Idiomas disponibles

Idiomas disponibles

Accessories
WARNING: Since accessories, other than those offered by
D
WALT, have not been tested with this product, use of such
E
accessories with this tool could be hazardous. To reduce the risk of
injury, only D
WALT recommended accessories should be used with
E
this product.
Recommended accessories for use with your tool are available at
extra cost from your local dealer or authorized service center. If you
need assistance in locating any accessory, please contact D
Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286,
call 1-800-4-D
WALT (1-800-433-9258) or visit our website: www.
E
dewalt.com.
MAXIMUM RECOMMENDED CAPACITIES
DCD780
WOOD
Auger
7/8" (22 mm)
Paddle
1-1/4" (32 mm)
Twist
1/2" (13 mm)
Self-feed
1-3/8" (35 mm)
Hole saw
2" (50 mm)
METAL
Twist
1/2" (13 mm)
Hole saw
1-3/8" (35 mm)
MASONRY
Carbide
Repairs
The charger and battery pack are not serviceable.
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by a D
authorized service center or other qualified service personnel. Always
use identical replacement parts.
Register Online
WALT
E
Thank you for your purchase. Register your product now for:
• WARRANTY SERVICE: Registering your product will help you
obtain more efficient warranty service in case there is a problem
with your product.
• CONFIRMATION OF OWNERSHIP: In case of an insurance
loss, such as fire, flood or theft, your registration of ownership will
DCD785
serve as your proof of purchase.
• FOR YOUR SAFETY: Registering your product will allow us to
contact you in the unlikely event a safety notification is required
7/8" (22 mm)
under the Federal Consumer Safety Act.
1-1/4" (32 mm)
Register online at www.dewalt.com/register.
1/2" (13 mm)
Three Year Limited Warranty
1-3/8" (35 mm)
D
WALT will repair, without charge, any defects due to faulty materials
E
or workmanship for three years from the date of purchase. This
2" (50 mm)
warranty does not cover part failure due to normal wear or tool
abuse. For further detail of warranty coverage and warranty repair
1/2" (13 mm)
information, visit www.dewalt.com or call 1-800-4-D
433-9258). This warranty does not apply to accessories or damage
1-3/8" (35 mm)
caused where repairs have been made or attempted by others. This
warranty gives you specific legal rights and you may have other rights
which vary in certain states or provinces.
1/4" (6.5 mm)
14
WALT factory service center, a D
E
WALT (1-800-
E
WALT
E

Publicidad

loading

Este manual también es adecuado para:

Dcd785