Led Indicator - Zivan UBC Manual De Uso

LED Indicator

RED LED shows that the battery is in initial charging phase.
YELLOW LED shows that the battery charger has reached 80% of charge.
GREEN LED shows that the battery has reached 100% of charge.
Further information can be found in the description of the Charging Curve.
Example: the RED LED on blinking indicates a constant tension phase.
Alarms
The flashing LED shows that an Alarm situation has occurred:
Condition
GREEN flash
RED-YELLOW flash
RED-GREEN flash
RED-YELLOW-GREEN flash
YELLOW-GREEN flash
When there is an alarm the battery charger stops supplying current.
External LED Indicator
Connector
4 3
2 1
D01236-14
Battery charger UBC
Alarm Type
Timeout
Battery Current
Battery Voltage
Thermal
Selection
Diagram connection
INSIDE
2
1
3
4
Description (Action)
Phase 1 have a duration in excess of the maximal allowed. (Verify the
battery capacity).
Loss of output Current control. (Failure of the control logic).
Battery not in conformity (verify the nominal voltage) or loss of output
Voltage control. (failure of the control logic).
Overheating of semiconductors. (Verify the fan operation).
An unavailable configuration has been selected (Verify the selector's
position)
OUTSIDE
LR
LV
English
PIN Use
1 Red LED anode
2 Not used
3 Common cathode LED
4 Green LED anode
7