GENERGY TAVASCAN Instrucciones De Uso página 42

3 Press the engine's ignition
switch to "ON" and then to
"START", release once the
engine has started.
NOTE: IF the
does not start up within 3 or 4
seconds, release the ignition
switch and wait for a few
seconds before trying again to
avoid overheating the ignition
switch.
4 Once started, wait for a few seconds and introduce the choke completely (open
air position).The engine will begin working stably and is ready to have equipments
plugged in.
.
NOTE: Do not leave the choke in an intermediate position, the blend would be
too rich and the engine would not work properly.
During the first start up of the machine the battery's charge may be low if stored for
too long. If you notice the charge is not enough, charge the battery with a slow
charge charger.
IGNITION SWITCH
engine
12
CHOKE