DIEL ME100 V3 Manual De Instalacion Y Uso página 14

ENGLISH
The words that appear on three digit display assume the following
meaning:
ICF: PT100 probe failure due to interruption or absence of probe.
SCF: PT100 probe failure due to electrical short circuit.
rES: memory resetting of the failure probe effected.
FAn: fan referred to a specific channel and fan.
CH(n): State of a specific channel n (1-8).
PrE: pre alarm relay.
ALL: alarm relay.
FAn: fan cooling system relay.
FLt: FAULT relay.
PROGRAMMING
Push and hold together the buttons UP and DOWN for programming
menu.
The functions of the buttons in this phase are indicated as follow:
button UP increases the proposed value, button DOWN decreases
the proposed value, button ENTER/TEST confirms and switches to
the next step.
The programming procedure begins with the choice of F parameter.
F=0: group of eight active channels, only one level for alarm and pre
alarm valid for all channels, fan cooling system function deactivated.
With F=0 is possible to set only P and A parameters.
F=1: group of eight active channels, only one level for alarm and pre
alarm valid for all channels, active fan cooling system with only one
level valid for lighting H and switching off L.
With F=1 is possible to set only four parameters: P, A, L, H.
F=0: group of eight active channels, only one level for alarm and pre
alarm valid for all channels, fan cooling system function deactivated.
With F=0 is possible to set only P and A parameters.
F=1: group of eight active channels, only one level for alarm and pre
14